hybrid bearings Precautions

Hybrid Hybrid bearings are sliding bearings in one, it is to work in a fluid state energy lubricated plain bearings, while static Hybrid bearings can operate under hydrostatic lubrication and hydrodynamic lubrication. When we pressed hybrid bearings in the movement need to pay attention to the following six things, prevent static journal bearing failure during use.
1, the normal use should be replaced 2 # spindle oil and coarse and fine filter after one year.
2, be sure to join the three-layer silk cloth filter during normal use pumping stations to add oil.
3, spindle pulley, wheel loading and unloading must be carried out in the state of the pumping station work. That spindle under hydrostatic oil floating state. This does not damage the spindle and Hybrid Bearing manufacturers.
4, the front wheel spindle work and grinding hydrostatic pressure pumping observation is within specification range.
5, when the device is shut down, it must first stopped grinding motor, until wheel stop, then turn off the pump station, or easy to damage the grinding head.
6, for any component on the pumping station, be sure to remove the high-pressure inlet hose fittings, complete replacement parts, oil self circulation 15-20 minutes before the inlet pipe connected to the grinding head, thus ensuring into the grinding spindle oil is filtered through fine super clean spindle oil. This can prolong the life of the hybrid spindle.