How to do the clutch release bearing failure

How to do the clutch release bearing failure

 (1) free travel is too small or the number of times by the excessive load. Upon request, the general clutch lever clearance between the High speed Spindle and the separation of 2.5mm more appropriate to reflect on the clutch pedal free travel for 30 ~ 40mm, free travel is too small or no free travel, will make the separation lever and separation bearing in a normally engaged state. According to the principle of fatigue damage, bearing work longer, more severe damage; the more times by the carrier, the more easily separated bearing fatigue damage. And the longer working hours, the higher the temperature of the bearing, the easier burning, reduce the release bearing life.

 (2) whether the separation was smooth adjustment lever and release fork is deformed, release bearing the return spring is good, but also has a great influence on the release bearing damage. Separated uneven, release fork deformation, release bearing spring does not return, will result in the clutch release bearing against the work, so that is always in the work release bearing state, the temperature rising, burn easily release bearing, release bearing lower life.