ZYS clutch bearing Failure

(1) excessive operating temperatures result in overheating. Many drivers cornering or deceleration, often half-pedal ZYS clutch bearing, and some also on the back foot in gear ZYS clutch bearing pedal; some vehicles free stroke adjustment is too large, making the ZYS clutch bearing is not complete, in a semi-engaged, semi-isolated state, this Status cause friction generated between sliding friction plate and flywheel, a large amount of heat transfer to the Wind turbine bearing, bearing the heat reaches a certain temperature, melting grease or diluted flow, so that the release bearing temperature is further increased when the temperature reaches a certain level will burn bad bearings.

(2) the lack of grease and abrasion. super precision bearings  lubricated with grease. In practice repairman Neglected release bearing lubrication problems, not the release bearing lubrication during installation, leading to ZYS clutch bearing release bearing short of oil. No lubrication or less the amount of wear lubricating bearings are often lubricated bearings several times to several times. Wear increases, the temperature will increase a lot, so more damage bearings. So in the repair process, the installation of the ZYS clutch bearing release bearing lubrication to be checked, timely lubrication maintenance.