ZYS clutch bearing Failure

(1) Free travel by excessive load is too small or the number. According to the requirements, generally ZYS clutch bearing gap between the Bearing manufacturing machine and the separation lever is 2.5mm more appropriate, is reflected in the free travel of the ZYS clutch bearing pedal 30 ~ 40mm, free travel is too small or no free travel, will make the separation with the separation lever Bearing in a normally engaged state. According to the principle of fatigue damage, bearing work longer, the more severe the damage; the more times by the carrier, the more easily separated bearing fatigue damage. And the longer working hours, the higher the temperature of the bearing, the easier burning, reduce the service life of bearings.

(2) whether the separation was smooth adjustment lever and release fork is deformed, release bearing measurement return spring is good, but also have a significant impact on the release bearing damage. Separated uneven, release fork deformation, release bearing spring does not return, will result in the ZYS clutch bearing release bearing against the work, the separated bearing condition is always in work, higher and higher temperatures, burn easily bearings, lower bearings life.