FAG double row angular contact ball bearings:

 FAG double row angular contact ball Precision bearing features: can withstand large radial loads and axial loads, especially with the need for rigid and axially fixed place. 3 at the beginning of
        FAG double row angular contact ball bearings basic types: 32B.33B. Did not fill the slot, is divided into open, double-sided tape seals (. RSR) and double-sided with a dust cover (.2 ZR), due to production reasons, bearings the outer ring seals or dust cover may have to prepare a trench. Contact angle of 25 degrees. 32, 33 on one side there is a filling slots, so pay attention when installing the raceway does not fill the tank to the side by the major loads. Contact angle of 35 degrees. 33DA contact angle of 45 degrees, suitable for varying the direction of large axial loads.
        FAG double row angular contact ball bearings Bearing clearance: with double semi-inner ring bearings are used to bear large axial load, which is often compared with the overall inner ring of the bearing tighter. It's normal clearance group representing an overall inner bearings group C3 clearance.
        FAG double row angular contact ball bearing cage: Default sheet steel cage, without the suffix. Guided by the ball is machined solid brass cage after using cone M represents; guided by the outer ring of solid brass cage suffix MA. Glass fiber reinforced polymer cage wash amine 66 (tvh and tvp) bearings can be used to stabilize the temperature below 120 degrees Celsius. Note drain intervals.
        FAG double row angular contact ball bearings allow speed: suitable working conditions, bearing speed may be higher than the reference speed, but not exceed the speed limit.
        FAG double row angular contact ball bearings Heat treatment: double-sided with a dust cover (non-contact seals) sided with a ring (contact seals)
        FAG double row angular contact ball bearings suffix: B: modified the internal structure of M: brass cage, ball guide MA: outer ring guided brass cage TVH: button connector molded glass fiber reinforced polyamide cage, steel ball guide .2 RSR: double-sided with a ring .2 RZ: double Shielded