ut the speed is low, and it must always be lubricated.

Curve of the wheel bolts as part of the raceway is hardened. To avoid stress concentration, thick-walled outer roller surface arc-shaped out of the loop. Curve with two rollers single and double seals, without seals, with seal ring a variety of models. Grease a large space with a storage ring, providing permanent lubrication, and extended lubrication intervals. N220 or PTFE gasket material for its operating temperature ranges of -30 ° C to +100 ° C or -30 ° C to +180 ° C. Dense loading curve wheel it can withstand heavy loads, but the speed is low, and it must always be lubricated.
Supporting roller has thick-walled outer ring, take advantage of this outer ring, the wheel can roll in the raceway, and can withstand large loads. VG-bearing roller pressure roller, eccentric roller, roller rocker. Wheel diameter cylindrical or spherical. Spherical outer ring can make use of the tilt position when installing compensated.
RSTO and STO-bearing rollers
DF-Series RSTO type roller taper roller bearing without inner ring, roller bearing can be directly used as a raceway shaft quenching operation. STO-belt inner ring, with its inner and outer rings and needle roller cage assembly can be installed separately. As RSTO and STO-bearing roller ring without ribs and the end, the installation must have axial guidance, its guiding surface is at least precision lathe.

RNA22 ... 2RS, NA22 ... 2RS-bearing roller
This wheel diameter wheel with STO same series. They just slightly wider, double sealed structure makes no maintenance, use temperature range is -20 ℃ -120 ℃. Installed without inner ring RNA22 ... 2RS series of roller bearing should pay attention not to damage the seals. Outer boot needs to end.

NATR and NATR ... PP-bearing roller
NATR series of roller bearing includes an outer ring, inner ring, roller cage assembly and pressed into and fixed to the inner side of the ring. NATR ... PP series also additional sealing ring. The wheel bearing grease with a large storage space, long-term use without greasing.

NATV and NATV ... PP-bearing roller
NATV series of roller bearing roller with NATR series is basically the same, the only difference is NATV series full complement needle roller type. So it can withstand heavy loads at low speeds, but must pay attention to regular lubrication. NATV ... PP series with seal structure.

NUTR-bearing roller
NUTR series of roller bearing is double row full complement cylindrical roller bearings, the outer ring guided by the ribs. All parts are made of bearing outer ring pressed into the sealing cap to form a complete unit, the sealing cover and the thrust ring together form a highly efficient clearance seal. The wheel bearing can withstand very heavy loads, because the rolling elements with axial guidance, even at high speeds can also withstand the impact of axial loads.