SKF Bearing developed by detecting

SKF Bearing developed by detecting the amount of deformation of the hub bearing to a component measuring tire load
The SKF Bearings on May 20, 2008 announced the development of wheel bearings by detecting the amount of deformation measured between tire and road load (N) component "Load Sensor Hub bearing manufacturer Unit (LS-HBU)". By measuring the road surface and the tire load can be predicted vehicle movement, thereby expected to improve vehicle stability. LS-HBU expected volume production in 2010.
At present, the vehicle control based on the configuration of the acceleration sensor and the vehicle yaw rate sensors. However, many body movements between the tire and the road surface caused by the load. If the load of the tire can be measured, the sensor can be compared by measuring the body faster operation of the vehicle predicted. The company did not disclose the measurement wheel bearing deformation amount of the particular method, only that "the outside of the hub by a combination of an acceleration sensor and other sensors to measure the load on the tireSeal word is clear: the bearing body will be printed with the brand words, labels and so on. Font is very small, but most are factory produced using Seal technology, but without the heat-treatment is carried out before the word pressure, so the font was small, but a deep concave, very clear. The font counterfeit products not only blurred, because the rough printing technology, fonts floating on the surface, and some can even be easily wiped off by hand.

Is there a hybrid ring: left hand holding the sleeve bearing the body, right hand to rotate toggle coat, listen to whether there is a hybrid ring. As most of the counterfeit products behind the production conditions, completely hand-mill operation in the production process will inevitably distracted by a class of impurities in the sand, hidden in bearing the body, so the rotation will be issued when hybrid ring. This is strictly enforced and production standards, and with the machine operation is the biggest difference between brands.