Bearing, SKF import bearing the detailed structure '

 Kunshan Bearing: SKF bearings and bearing on the relevant knowledge, everyone is no stranger SKF bearings, SKF bearings production accounts for 20% of total production of similar products. SKF provides standard products with all kinds of bearings more than kind. In addition to SKF bearings SKF Group, but also manufacturing linear bearings, plain bearings, bearing housing, ball and roller screw, textile machinery parts, retaining ring, machine tools and precision mechanical parts. In the above-mentioned areas to get extensive experience, which owns the development, manufacture and application of advanced engineering products essential knowledge and expertise. The following give you a brief introduction SKF bearings and bearing:
    Bearing Type: SNL bearing, shaft diameter 20-160mm
    Options: double lip seal (TG)
    Before starting work, please read the instructions for use of the entire contents:
    1.skf bearing mounting and dismounting sometimes involve; heavy to carry, tools, and other equipment used or the use of high-pressure oil. To avoid accidents, the human body injury or property damage, please carefully observe the relevant instructions.
    (2) ensure that the environment clean.
    3 Check the size and shape tolerances journal.
    4 Check the support surface roughness Ra is less than 12.5μm. Flatness tolerance should IT7. For less demanding applications, available IT8.
    If SKF wind turbine bearing mounted on an adapter sleeve, determine the direction of the bearing. Bearing roof nozzle location should always be in tight sleeve nut on the other side. Must pay attention to the direction of the entire bearing, because the cover and base are required to install the original direction.
    Determining bearing in the direction of the support surface. Installed anchor bolts but do not tighten.
    Half will be inserted into the open lips sealed on both sides of the housing base seal groove. The sealing member fills the space between the two lips grease. If the bearing for the shaft end, insert the cap on one side instead of seals.
    The SKF bearings mounted on the shaft; ladder mounted directly on the shaft or using an adapter sleeve. Fill the bearing grease. The grease filling amount recommended to join the rest of the sides of the housing base.
=============================================