Tapered roller bearings use

Tapered roller bearings mainly bear radial diameter and axial joint load. Load bearing capacity depends on the outer ring raceway angle, angle greater carrying capacity. These bearing manufacturer are separable bearings, rolling bearing according to the number of rows into single row, double row and four row tapered roller bearings. Single row tapered roller bearing clearance to be adjusted during installation the user; double row and four row tapered roller bearing clearance in the factory according to user requirements is given, not to be user adjusted. Tapered roller bearings have tapered inner and outer ring raceway, Tapered Roller arranged in between. All conical surface projection lines are the same point on the bearing axis together. This design makes tapered roller bearings particularly suitable for combined (radial and axial) loads. Most of the axial load bearing capacity is determined by the contact angle α; α angle increases, the higher the axial load capacity. Angle size calculation factor e; e larger the contact angle the greater the bearing axial load greater applicability. Tapered roller bearings are usually separated type, namely the belt roller and cage assembly of inner components can be composed with tapered conical outer inner (outer) installed separately. Tapered roller bearings are widely used in automotive, mill, mining, metallurgy, plastics machinery and other industries.Bearing clearance is defined as a case of a fixed ring, another ring in the radial or axial flow by the maximum amount, the clearance is divided into radial clearance and axial clearance two kinds . Move needle bearing assembly, the clearance is not too big, not too small. Clearance is too large, it will cause the load to move the body to withstand the reduced number of individual load increases to move the body, thereby reducing the accuracy of rotation of the bearing, reducing the service life; clearance is too small, the friction will increase, the heat generated increases, increased wear, also can reduce bearing life. Therefore, the bearing assembly must strictly control and adjust the clearance.